The Photo can pretty much speak for itself.  A "Gridwall" hanger was used as found at a retail source, with a slight modification.

A rubber stop the thickness of the gutter was added as a modification.  The rubber stop was found at a local specialty hardware.  It was called a "Rubber equipment foot".  It had a molded in bolt. 

The gridwall hanger was drilled with the appropriate sized hole to accept the bolt of the rubber foot.  A nylon lock nut was spun on to attach the rubber foot to the gridwall hanger.

The Lantern hanger can be hooked on in a second or two.  Easily removed and stored for traveling.  The various hooks will accept various sized lantern.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.